The Design Synopsis report is shown in the lower view on the Design tab and is also available from the Print Report Manager dialog box.

This report presents a summary of the design results from the analysis and also the design parameters set in the Design Parameters dialog box.

The first set of design information is the amount of minimum Pjack for each tendon required to satisfy tension requirements. The name of the controlling combination is given in parentheses. The amount of Pjack required at each POI and for the top and bottom of the cross section is available from the Design Results screen.

The second set of design information is the Initial (fci) and Final (fc) concrete compressive strengths required to satisfy compression requirements. The concrete strengths required at each POI and for the top and bottom of the cross section are available from the Design Results screen.

The third set of design information shows losses based on code equations.

The fourth and last set of design information is an echo of the permissible stresses set using the Design Parameters dialog box.

The fifth and the last set of design information shows the sign convention.